This Aqua Creek 2 Button Hand Set / Remote Control is made by LINAK for the Pro Pool Lift series. It is designed to control the following lifts:
This Aqua Creek 4 Button Hand Set / Remote Control is made by LINAK for the control the following lifts:
This Aqua Creek 2 Button Remote designed to work with several of the Aqua Creek Lifts, including the Pro Pool Lift Series, and Ranger Lift. This fully submergible push button remote handset puts you in control of the operation of your lift.Ships UPS ONLY!
The Control Box controls operation of lift it is the electronic brains of the lift. This is the part where you attach the 24 volt battery.
This Aqua Creek Actuator has No H Frame. It is for the Pro Series Lift AT1, such as Ranger, Patriot with Linak Controls.Ships UPS ONLY!
This Aqua Creek 24 volt Battery Pack is specially made to work 98% of all Aqua Creek Spa & Pool Lifts. About the size of a transistor radio, you pull off the lift without tools and snap onto a charger. The battery will last much longer if you don't wait for it to run down before charging it. The best practice is to leave it on the charger whenever the lift is not being used. It will only draw electricity as needed and the charger will not over charge.
NEW - Dual Handset option for Ranger, Pro Pool and Pro Pool XR. Allows for use of two Hand Set (Remote controls). Usually one handset up on deck and the other at the pool level. The remote controls are designed to be submerged in water, but should not be left under water full time.
HANDSET KIT, DUAL, PRO POOL XR LIFTS.Ships UPS ONLY!
Actuator, Vito 400MM Push, for Scout, Elite & Ultra